Settings
When malfunction occurs, user can check the current motor speed in rpm. If it happens again, it will
overwrite the previous record.
Torque Command at Malfunction
Settings
When malfunction occurs, user can check the current torque command. If it happens again, it will
overwrite the previous record.
Status of Multi-function Input Terminal at Malfunction
Settings
Status of Multi-function Output Terminal at Malfunction
Settings
When malfunction occurs, user can check the status of multi-function input/output terminals. If it
happens again, it will overwrite the previous record.
Drive Status at Malfunction
Settings
When malfunction occurs, please check the drive status (communication address 2119H). If
malfunction happens again, the previous record will be overwritten by this parameter.
Reserved
Reserved
Treatment to Output Phase Loss (OPHL)
Settings
Pr.06-45 defines how the drive will operates when output phase loss occur.
Deceleration Time of Output Phase Loss
Settings
0.0~6553.5℃
0~65535
0000h~FFFFh
0000h~FFFFh
0000H~FFFFh
0: Warn and keep operating
1: Warn and ramp to stop
2: Warn and coast to stop
3: No warning
0.000~65.535 sec
12-
Chapter 12 Description of Parameter SettingsC2000 Series
112
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: Read only
Factory Setting: 3
Factory Setting:0.500