Delta C2000 series User Manual page 522

API
EADD
120
D P
Bit Devices
X Y M K
S1
＊
S2
＊
D
＊
Operands:
Please refer to the specifications of each model for the
range of operands.

：augend, S
S
Explanation
1

S
1
is stored in D. All calculation are done using binary floating poiont number.
 If the source operand S1 or S2 is specified as constant K or H, the constant will
automatically be converted to binary floating point value for the addition
operation.
S1 and S2 can designate the same register. In this case, if the instruction is specified
as "continuous execution instruction" (generally DEADDP instruction) and the drive
contact is ON,the register will be added once in every scan.
 When X0 = On, the sum of binary floating point number (D1, D0) + binary floating
Example
point number (D3, D2) will be saved in (D11, D10).
X0
 When X2 = On, the sum of binary floating point number
X2
Word Devices
H KnX KnY KnM T
＊
＊
＊
：addend, D：sum
2
S1 S2 D. The floating point value in S1 and S2 are added and the result
DEADD D0
DEADD D10
Chapter 16 PLC Function C2000 Series
Floating Point Addition
16-bit command (5 STEPS)
C D －
＊
32-bit command
＊
DEADD
＊
Flag signal: none
D2 D10
K1234 D20
16-75
－ － －
DEADDP