Configuring Static Routes Between The Pe And Ce Routers - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide

Configuring Static Routes Between the PE and CE Routers

840
You can include this statement at the following hierarchy levels:
[edit routing-options rib-groups group-name]
[edit logical-systems logical-system-name routing-options rib-groups group-name]
NOTE: The
[edit logical-systems]
Series routers.
RIP instances are supported only for VRF instance types. You can configure multiple
instances of RIP for VPN support only. You can use RIP in the customer edge-provider
edge (CE-PE) environment to learn routes from the CE router and to propagate the PE
router's instance routes in the CE router.
RIP routes learned from neighbors configured under any instance hierarchy are added to
the instance's routing table,
RIP does not support routing table groups; therefore, it cannot import routes into multiple
tables as the OSPF or OSPFv3 protocol does.
You can configure static (nonchanging) routes between the PE and CE routers of a VPN
routing instance. To configure a static route for a VPN, you need to configure it within the
VPN routing instance configuration at the
hierarchy level.
routing-options]
To configure a static route between the PE and the CE routers, include the
statement:
static {
route destination-prefix {
next-hop [ next-hops ];
static-options;
}
}
You can include this statement at the following hierarchy levels:
[edit routing-instances routing-instance-name routing-options]
[edit logical-systems logical-system-name routing-instances routing-instance-name
routing-options]
NOTE: The
[edit logical-systems]
Series routers.
For more information about configuring routing protocols and static routes, see Junos
OS Routing Protocols Library.
hierarchy level is not applicable in ACX
.
instance-name.inet.0
[edit routing-instances routing-instance-name
hierarchy level is not applicable in ACX
static
Copyright © 2017, Juniper Networks, Inc.