Understanding Cos Cli Configuration Statements On Acx Series Universal; Access Routers - Juniper ACX1000 Configuration Manual

Related
Documentation
Understanding CoS CLI Configuration Statements on ACX Series Universal Access
Routers
Copyright © 2017, Juniper Networks, Inc.
Strict-priority and weighted deficit round-robin scheduling.
Multiple strict-priority queues per port.
Per-queue committed information rate (CIR) and peak information rate (PIR).
Per-physical-port shaping.
Queue statistics features include:
Per-egress-queue enqueue statistics in packets, bytes, packets per second (pps), and
bits per second (bps).
Per-egress-queue transmit statistics in packets, bytes, pps, and bps.
Per-egress-queue drop statistics in packets and pps.
Understanding CoS CLI Configuration Statements on ACX Series Universal Access
Routers on page 865
Configuring CoS on ACX Series Universal Access Routers on page 866
ACX Series Universal Access Routers have some statements or statement options
supported on other platforms that are not supported or may not have effect on ACX
Series devices.
The following CLI options are not applicable to ACX Series Universal Access Routers:
[edit class-of-service schedulers scheduler-name priority-level]
low;
medium-low;
medium-high;
high;
Configure the strict-high-priority queue with unlimited transmission bandwidth so that
all traffic receives precedence over any non strict-high priority queues.
At the [edit class-of-service classifiers type classifier-name]
and classifier types are not supported. For the
ieee-802.1ad
outer tag is supported.
The following CLI stanza is not applicable to ACX Series Universal Access Routers.
[edit class-of-service interfaces
irb {
unit logical-unit-number {
classifiers {
type (classifier-name | default);
}
rewrite-rules {
Chapter 27: Configuring Class of Service
hierarchy level, the
interface-name]
dscp-ipv6
classifier type, only the
dscp
865