Operation In Monitor Mode; Using The Monitor Mode - YASKAWA SGM series User Manual

4.1.6 Operation in Monitor Mode

1) The monitor mode allows the reference values input into the Servopack, I/O signal status,
and Servopack internal status to be monitored.
The monitor mode can be set during motor operation.

2) Using the Monitor Mode

The example below shows how to display 1500, the contents of monitor number Un-00.
For JUSP-OP02A-1
1) Press
JUSP-OP02A-1
2) Press the
monitor number to display.
3) Press
itor number selected at step 2.
4) Press
tor number again.
For JUSP-OP03A
1) Press
JUSP-OP03A
2) Press the
monitor number to display.
3) Press
tor number selected at step 2.
4) Press
tor number again.
DSPL to select the monitor mode
SET
and keys to select the
DATA
to display the data for the mon-
ENTER
DATA
once more to display the moni-
ENTER
MODE/SET
to select the monitor mode.
UP DOWN
and keys to select the
DATA
to display the data for the moni-
DATA
once more to display the moni-
4.1 Basic Operations
Monitor
Mode
Monitor
Data
Number
Monitor
Data
Number
Monitor
Mode
Monitor
Data
Number
Monitor
Data
Number
4
179