YASKAWA SGM series User Manual page 187

USING THE DIGITAL OPERATOR
4.1.5 Operation in User Constant Setting Mode cont.
JUSP-OP03A
4
176
For JUSP-OP03A
MODE/SET
1) Press to select the user constant
setting mode.
UP
2) Press the and
user constant number to set.
DATA
3) Press to display the current data for
the user constant selected at step 2.
UP
4) Press the and
data to the required value.
DATA
5) Press to store the data.
DATA
6) Press once more to display the user
constant number again.
7) Repeat steps 2 to 6 as often as required.
• Refer to Appendix D List of User Constant Settings
DOWN
keys to select the
DOWN
keys to change the
MODE/SET
Setting
Mode
User Constant Number
Value changes rapidly
when key held down
The stored data flashes.
User Constant
Data
Numberaa