YASKAWA SGM series User Manual page 211

USING THE DIGITAL OPERATOR
4.2.5 Speed Reference Offset Manual Adjustment Mode cont.
JUSP-OP02A-1
4
200
2) Follow the procedure below to manually adjust the reference voltage.
For JUSP-OP02A-1
1) Press DSPL to select the user constant
SET
setting mode.
2) Select the user constant number Cn-00.
(User constant Cn-00 is selected when the
power is turned ON.)
Press the
digit.
Press and
value.
DATA
3) Press to display the current data for
ENTER
the user constant Cn-00.
4) Press the and
data to 03.
DSPL
5) Press to select the speed refer-
SET
ence offset manual adjustment mode.
(The amount of speed reference offset is
displayed.)
6) Press the and
amount of offset.
(Adjust the speed references.)
7) Press DSPL to return to the user constant
SET
data display.
DATA
8) Press to return to the setting mode
ENTER
display. This ends the reference offset
manual adjustment.
and keys to select the
keys to change the
keys to change the
keys to adjust the
Setting Mode
Select Cn-00.
The selected digit
flashes.
User Constant Number
Set to 00-03.
Press the
keys to change the
value.
Speed Reference Offset
Manual Adjustment Mode
Setting Mode Display
Data