YASKAWA SGM series User Manual page 266

3) "02A(B)314B", "02A(B)316B", "03B314B", "03B316B","04A314B" and "04A316B" have
a keyed shaft. The keyway complies with JIS B 1301-1976 (precision). A straight key is
supplied.
4) The quoted allowable radial load is the value at a position 25 mm (0.98 in.) from the mo-
tor mounting surface.
5) The electromagnetic brake is only to hold the load in position and cannot be used to stop
the motor.
• 750 W (1.01 HP)
Encoder Lead
Motor Lead (Teflon wire) AWG22
UL1828 or UL3534
Protective Tube
(Black)
34 (1.34)
Brake
Lead
Holding Brake
Incremental Encoder
(Deenergisation Operation)
2048 P/R
Voltage: 90 VDC, Dissipated
current (Reference): 0.15 A
Brake Holding Torque= Motor Rated Torque
Type QK
SGM-
08A312B No key
08A314B 30 3
08A316B (1.18) (1 18) (0.12) (0 12)
Note 1) The detector uses an incremental encoder 2048 P/R.
2) Type "A" indicates 200 V specification.
3) "08A314B" and "08A316B" have a keyed shaft. The keyway complies with JIS B
1301-1976 (precision). A straight key is supplied.
111 (4.37)
15 (0.59)
U W T Screw
Dimen-
sions

5 5
(0 20) (0.20) (0.20) (0 20)
M5,
depth 8
(0.31)
5.4Σ-Series Dimensional Drawings
Encoder Plug
Motor Plug
Cross-section Y-Y
4-φ7 (φ0.28)
MTG Holes
Shaft end screw hole
(SGM-
with key type only)
Output Approx. Allowable
W mass radial
(HP) kg
(lb) N (lb)
750 4.3 392 (88)
(1 01) (1.01) (9 8) (9.48)
Screw
80 (3.15)
φ
90
(φ3.54)
5
4−R8.2
08 A316B,
Allowable
thrust
load load
N (lb)
( ) 147 (33) ( )
255