Flowchart For Servopack Selection - YASKAWA SGM series User Manual

SERVO SELECTION AND DATA SHEETS
5.1.2 Selecting a Servopack cont.
5
214

Flowchart for Servopack Selection

Start Servopack selection
1) Enter rated output
D Enter a rated output equal
to the motor capacity.
Enter rated output
2) Determine supply voltage
100 V / 200 V ?
3) Select model
a) Variable speed control required?
b) Form position control loop with
host controller?
No
c) Tension control required?
d) Forced stopping or other torque
control required?
No
e) Switching required between
variable speed and torque
control?
No
f) Direct position specification
required by pulse input?
Check specifications in 5.3.1 Ratings
D D D
and Specifications.
Enter code as characters 1 and 2:
30W (0.04HP) = A3, 50W (0.07HP) = A5,
100W (0.13HP) = 01, 200W (0.27HP) = 02,
300W (0.40HP) = 03, 400W (0.53HP) = 04,
750W (1.01HP) = 80
200 V power supply
100 V power supply
Yes Use speed references
Yes Use torque references
Switch between speed
Yes and torque references
Yes select model for speed/torque control
select model for
position control
SGDA-JJ__
SGDA-jjA_
SGDA-jjB_
SGDA-jjjS
SGDA-jjjP
To next page (A)