3) Using the Setting Mode for Memory Switches (Cn-01, Cn-02)
Turn the bits of the memory switches ON and OFF to select the functions required.
The example below shows how to turn ON Bit 4 of memory switch Cn-01.
For JUSP-OP02A-1
1) Press
setting mode.
JUSP-OP02A-1
2) Select the user constant number to set.
Press the
digit.
Press the
value.
3) Press
the memory switch selected at step 2.
4) Press the
bit number to set.
5) Press the
memory switch data ON or OFF for the bit
number.
6) Repeat steps 4 and 5 as often as required.
7) Press
Turning Bits ON and OFF
TERMS
Memory switches use bits, not numbers, to select
functions.
Sixteen bits are available (1 to 9 and A to E). Select
the required functions by turning the appropriate bit
ON (function ON) or OFF (function OFF).
DSPL
to select the user constant
SET
and
keys to select the
and
keys to change the
DATA
to display the current data for
ENTER
and
keys to select the
and
keys to set the
DATA
to store the data.
ENTER
4.1 Basic Operations
Setting
Mode
The selected
digit flashes.
Memory
User Constant
Switch Data
Number
Bit Number to Set
Bit
Number
Press either key.
or
The stored data
flashes.
: = OFF
= ON
Bit
Number
to Set
4
177