YASKAWA SGM series User Manual page 199

USING THE DIGITAL OPERATOR
4.2.2 Operation Using the Digital Operator cont.
JUSP-OP03A
4
188
For JUSP-OP03A
MODE/SET
1) Press to select the user constant
setting mode.
UP
2) Press the and
user constant number Cn-00.
(User constant Cn-00 is selected when the
power is turned ON.)
DATA
3) Press to display the current data for
the user constant Cn-00.
UP
4) Press the and
data to 00.
(This user constant is set to 00 when the
power is turned ON.)
MODE/SET
5) Press to set the Digital Operator in
operation mode. Operation is now pos-
sible under Digital Operator control.
DATA
6) Press to set the servo ON status (mo-
tor power turned ON).
Select Servo ON/Servo OFF
UP
7) Press the and
motor.
Motor Forward/Reverse Rotation
MODE/SET
8) Press to revert to
sets the servo OFF status (motor power
turned OFF).
(Alternatively, press
OFF status.)
DOWN
keys to select the
DOWN
keys to change the
DOWN
keys to operate the
. This
DATA
to set the servo
Setting Mode
Select Cn-00.
User Constant Number
Set to 00-00.
Value changes
rapidly when key
held down.
Display for operation mode from
Digital Operator
Press
Servo ON
DATA
- motor ON
Servo OFF
- base block
to change.
Motor runs
forward while
this key is
pressed.
Motor runs
backward while
this key is
pressed.
Data
Motor
Forward
Rotation
Motor
Reverse
Rotation