YASKAWA SGM series User Manual page 198

DATA
3) Press to display the current data for
ENTER
the user constant Cn-00.
4) Press the and
data to 00.
(This user constant is set to 00 when the
power is turned ON.)
5) Press DSPL to set the Digital Operator in
SET
operation mode. Operation is now pos-
sible under Digital Operator control.
JOG
6) Press to set the servo ON status
SVON
(motor power turned ON).
Select Servo ON/Servo OFF
7) Press the and keys to operate the
motor.
Motor Forward/Reverse Rotation
DSPL
8) Press to revert to
SET
sets the servo OFF status (motor power
turned OFF).
JOG
(Alternatively, press
SVON
OFF status.)
DATA
9) Press to return to the setting mode
ENTER
display. This disables operation under Dig-
ital Operator control.
User Constant Number
keys to change the
Press the
keys to change the
value.
Display for operation mode from
Digital Operator
Press
to change.
. This
to set the servo
4.2 Using the Functions
Data
Set to 00-00.
Servo ON
- motor ON
Servo OFF
- base block
Motor runs
Motor
forward while
this key is
Forward
pressed.
Rotation
Motor runs
backward while Motor
this key is
Reverse
pressed.
Rotation
Setting Mode Display
187
4