2) Using the Setting Mode for Constant Settings (Cn-03 to Cn-23)
The constant settings (Cn-03 to Cn-23) allow setting of a constant. Check the permitted
range of the constant in Appendix D List of User Constant Settings, before changing the
data. The example below shows how to change user setting Cn-15 from 100 to 85.
For JUSP-OP02A-1
1) Press
setting mode.
JUSP-OP02A-1
2) Select the user constant number to set.
Press the
digit.
Press the
value.
3) Press
the user constant selected at step 2.
4) Set the required data.
Press the
digit.
Press the
value.
5) Press
6) Press
constant number again.
7) Repeat steps 2 to 6 as often as required.
DSPL
to select the user constant
SET
and
keys to select the
and
keys to change the
DATA
to display the current data for
ENTER
and
keys to select the
and
keys to change the
DATA
to store the data.
ENTER
DATA
once more to display the user
ENTER
4.1 Basic Operations
Setting
Mode
The selected
digit flashes.
User Constant
Data
Number
The selected
digit flashes.
The stored
data flashes.
User Constant
Data
Number
4
175