8.2
Operation in Monitor Mode
The example below shows how to display the contents of monitor number Un000 (when the servomotor
moves at 1500 mm/s)
Display after
Step
Operation
1
2
3
4
Keys
Press the MODE/SET Key to select the monitor mode.
MODE/SET
DATA/
Press the UP or DOWN Key to select the monitor number
to be displayed.
MODE/SET
DATA/
Press the DATA/SHIFT Key for approximately one sec-
ond to display the data of Un000 (motor speed).
MODE/SET
DATA/
Press the DATA/SHIFT Key for approximately one sec-
ond to return to the display of step 1.
MODE/SET
DATA/
8.2 Operation in Monitor Mode
Operation
8
8-3