Basic Operations; Connecting The Digital Operator; Jusp-Op02A-1 (Hand-Held Type); Jusp-Op03A (Mount Type) - YASKAWA SGM series User Manual

USING THE DIGITAL OPERATOR

4.1.1 Connecting the Digital Operator

4.1

Basic Operations

4.1.1 Connecting the Digital Operator
4
168
This section describes the basic operations using the Digital Operator.
4.1.1 Connecting the Digital Operator
4.1.2 Resetting Servo Alarms
4.1.3 Basic Functions and Mode Selection
4.1.4 Operation in Status Display Mode
4.1.5 Operation in User Constant Setting Mode
4.1.6 Operation in Monitor Mode
The Digital Operator is available as two types: JUSP-OP02A-1 (Hand-held Type) and JUSP-
OP03A (Mount Type).
Each type is connected to the Servopack as shown below.

JUSP-OP02A-1 (Hand-held Type)

• The Digital Operator connector can be connected or disconnected while the Servopack
power is ON.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

JUSP-OP03A (Mount Type)

Connect using the 1 m
cable supplied.
168
169
170
171
174
179
Attach directly to
the Servopack
Servopack