Using The Alarm Trace-Back Mode - YASKAWA SGM series User Manual

USING THE DIGITAL OPERATOR
4.2.1 Operation in Alarm Trace-back Mode cont.
JUSP-OP02A-1
4
JUSP-OP03A
184

2) Using the Alarm Trace-back Mode

Follow the procedure below to determine which alarms occurred previously.
For JUSP-OP02A-1
1) Press DSPL to select the alarm trace-
SET
back mode.
2) Press the and
alarm sequence numbers up and down
and display information on previous
alarms. The higher the left-hand digit
(alarm sequence number), the older the
alarm data.
For JUSP-OP03A
MODE/SET
1) Press
back mode.
UP
2) Press the and
alarm sequence numbers up and down
and display information on previous
alarms. The higher the left-hand digit
(alarm sequence number), the older the
alarm data.
keys to scroll the
to select the alarm trace-
DOWN
keys to scroll the
Alarm Trace-back Mode
Older
Newer
Alarm Trace-back Mode
Older
Newer