Show Vlan - Allied Telesis x510-28GTX Command Reference Manual

VLAN C
OMMANDS

SHOW VLAN

show vlan
Overview Use this command to display information about a particular VLAN by specifying its
VLAN ID. Selecting all will display information for all the VLANs configured.
show vlan
Syntax
{all|brief|dynamic|static|auto|static-ports|<1-4094>}
Parameter
<1-4094>
all
brief
dynamic
static
auto
static-ports
Mode User Exec and Privileged Exec
Example To display information about VLAN 2, use the command:
awplus#
Output Figure 16-3: Example output from the show vlan command
VLAN ID Name
======= ================ ======= ======= ====================================
2 VLAN0002
...
Related vlan
Commands
C613-50170-01 Rev B
Description
Display information about the VLAN specified by the VLAN ID.
Display information about all VLANs on the device.
Display information about all VLANs on the device.
Display information about all VLANs learned dynamically.
Display information about all statically configured VLANs.
Display information about all auto-configured VLANs.
Display static egress/forbidden ports.
show vlan 2
Type State Member ports
(u)-Untagged, (t)-Tagged
STATIC ACTIVE port1.0.3(u) port1.0.4(u) port1.0.5(u)
port1.0.6(u)
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
577