Private-Vlan - Allied Telesis x510-28GTX Command Reference Manual

VLAN C
OMMANDS
-
PRIVATE VLAN

private-vlan

Overview Use this command to a create a private VLAN. Private VLANs can be either primary
or secondary. Secondary VLANs can be ether community or isolated.
Use the no variant of this command to remove the specified private VLAN.
For more information, see the
private-vlan <vlan-id> {community|isolated|primary}
Syntax
no private-vlan <vlan-id> {community|isolated|primary}
Mode VLAN Configuration
awplus#
Examples
awplus(config)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus#
awplus(config)#
awplus(config-vlan)#
awplus(config-vlan)#
awplus(config-vlan)#
C613-50170-01 Rev B
Parameter Description
<vlan-id>
VLAN ID in the range <2-4094> for the VLAN which is to be made a
private VLAN.
community
Community VLAN.
isolated
Isolated VLAN.
primary
Primary VLAN.
configure terminal
vlan database
configure terminal
vlan database
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
VLAN Feature Overview and Configuration
vlan 2 name vlan2 state enable
vlan 3 name vlan3 state enable
vlan 4 name vlan4 state enable
private-vlan 2 primary
private-vlan 3 isolated
private-vlan 4 community
no private-vlan 2 primary
no private-vlan 3 isolated
no private-vlan 4 community
Guide.
573