Show Vlan Classifier Rule - Allied Telesis x510-28GTX Command Reference Manual

VLAN C
OMMANDS

SHOW VLAN CLASSIFIER RULE

show vlan classifier rule
Overview Use this command to display information about all configured VLAN classifier rules
or a specific rule.
show vlan classifier rule [<1-256>]
Syntax
Mode User Exec and Privileged Exec
Usage If a rule ID is not specified, all configured VLAN classifier rules are shown. If a rule ID
is specified, a specific configured VLAN classifier rule is shown.
Example To display information about VLAN classifier rule 1, enter the command:
awplus#
Output Figure 16-8: Example output from the show vlan classifier rule1 command
Related vlan classifier activate
Commands
vlan classifier rule ipv4
vlan classifier rule proto
C613-50170-01 Rev B
Parameter Description
<1-256>
VLAN classifier rule identifier
show vlan classifier rule 1
vlan classifier group 1 add rule 1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
582