WAGO-I/O-SYSTEM 750
750-464 2/4 AI RTD configurable
6.2.3
Parameter Sets
For use of the parameter channel, parameter sets are defined and indexed using
parameter addresses (A7 ... A0). Module-specific parameters (parameters 0
through 249) and general system parameters (parameters 250 through 255) are
differentiated.
6.2.3.1
General Parameter Data (System Parameter Range)
The following addresses are defined to access the system parameters of the I/O
modules:
Table 35: System Parameters
Address
250 ... 253
254
255
Pos : 88 /Serie 750 ( WAGO-I/O-SYST EM)/In Betrieb nehmen/Parametrier en über Parameter kanal/Parameter kanaladres sen 750-464 @ 6\mod_1263292139765_21.doc x @ 47866 @ 4 @ 1
6.2.3.2
I/O Module-Specific Parameter Data
The following addresses are defined for access to the specific parameter data of
the I/O module:
Manual
Version 1.0.1
Mode
Parameter
R/W
RESERVED
R/W
TIMEOUT
R
NO_OF_PRMS
W
SET_DEFAULT_PRMS
Commissioning
Description
Reserved for expansions
This parameter contains the
maximum permissible time in
milliseconds that can elapse for
the transfer of the parameter set.
If TIMEOUT = 0, the
monitoring time is infinite.
Number of words (parameter
data) of the I/O module.
The I/O module is reset to the
default setting.
47