Configuration Of The I/O Module Via The Parameter Channel; General Parameter Data (System Parameter Range) - WAGO -I/O-SYSTEM 750 Manual

42 • 750-636 [DC Drive Controller]

Configuration of the I/O Module via the Parameter Channel

2.1.1.10 Configuration of the I/O Module via the Parameter Channel
Defined parameters indexed via parameter addresses configure the I/O module
with the parameter channel. General parameter addresses (system parameters)
and I/O module-specific parameter addresses are differentiated.
2.1.1.10.1

General Parameter Data (System Parameter Range)

The following parameters/parameter addresses are defined to access the
system parameters of the I/O module:
Parameter
RESERVED
TIMEOUT
NO_OF_PRMS
SET_DEFAULT_PRMS
Description
Reserved for expansions
This parameter contains the maximum
permissible time in milliseconds that
can elapse for the transfer of the
parameter set. If TIMEOUT = 0, the
monitoring time is infinite.
Number of words (parameter data) of
the I/O module
The I/O module is reset to factory
settings
Parameter
Access
address
250...253 R/W
254 R/W
R
255
W
WAGO-I/O-SYSTEM 750
I/O-Modules