Configuration Of Digital Output (Index 432); Table 35 Digital Input Settings; Table 36 Dc Ok; Table 37 Load Current Warning Level Exceeded - WAGO 2789-9080 Product Manual

2789-9080
Digital input settings
Bits 10 to 12 control the settings of the digital input.
Bit 10
0
1
0
0

4.2.4.9 Configuration of digital output (Index 432)

DC OK
Bit 0 enables or disables the output of the DC OK status via the digital output.
Bit 0
1
0
Load current warning level exceeded
Bit 1 indicates whether the overload warning threshold has been exceeded.
Bit 1
1
0
Electronic circuit breaker tripped
Bit 2 indicates whether the electronic circuit breaker has tripped.
Bit 2
1
0
Power supply switched off (latched)
Bit 3 controls the latching shutdown.
Bit 3
1
0
Enable switching DO on/off via process data
Bit 4 enables or disables the control of the output via cyclic process data.
| Version: 1.1.0
Communication Module IO-Link
Bit 11 Bit 12 IODD Value
0 0 Non-inverted
0 0 Inverted
1 0 Function triggered by low-high
transition
0 1 Function triggered by high-low
transition
IODD Value
active
inactive
IODD Value
active
inactive
IODD Value
active
inactive
IODD Value
active
inactive
Fieldbus Description
Table 35: Digital input settings
Description
normal, not inverted
inverted
Function on edge change (0 to 1)
Function on edge change (1 to 0)
Table 36: DC OK
Description
enabled
disabled
Table 37: Load current warning level exceeded
Description
enabled
disabled
Table 38: Electronic circuit breaker tripped
Description
enabled
disabled
Table 39: Power supply switched off (latched)
Description
enabled
disabled
25