Table 76: Wbm "Tcp/Ip Configuration" Page - "Dns Server" Group - WAGO I/O System 750 Manual

178 Appendix
"DNS Server" Group
Table 76: WBM "TCP/IP Configuration" Page – "DNS Server" Group
Parameters
Active
Assigned by DHCP
Assigned by user
New Server IP
Click the [Delete] button to delete the selected DNS server. The change takes
effect immediately.
Click the [Add] button to add the entered DNS server. The change takes effect
immediately.
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
750-8210/040-000 PFC200; G2; 4ETH; XTR
Explanation
The active DNS servers are displayed.
Up to 3 active DNS servers can be used.
The index reflects the query order.
The first DNS server assigned via DHCP is given
the highest priority.
The DNS servers assigned if necessary by DHCP
(or BootP) are displayed. If no DNS server has been
assigned by DHCP (or BootP), "No DNS Servers
assigned by DHCP" is displayed.
The addresses of the defined DNS servers are
displayed. If no server has been entered, "No DNS
Servers configured" is displayed.
Add additional DNS server addresses.
You can enter as many addresses as you like, but a
maximum of three entries are used.
The entries actually used result from an alternating
combination of the "Assigned by DHCP" and
"Assigned by user" lists.
WAGO I/O System 750