View; Figure 23: View Ethernet Tcp/Ip Fieldbus Controller - WAGO -I/O-SYSTEM 750 Manual

50 Device Description
4.1

View

The view below shows the three parts of the device:
• The fieldbus connection is on the left side.
• LEDs for operation status, bus communication, error messages and
diagnostics, as well as the service interface are in the middle area.
• The right side shows the power supply unit for the system supply and for
the field supply of the attached I/O modules via power jumper contacts.
LEDs show the status of the operating voltage for the system and field
supply (jumper contacts).

Figure 23: View ETHERNET TCP/IP Fieldbus Controller

Manual
1.5.0
750-882 Media Redundancy ETHERNET Controller
WAGO-I/O-SYSTEM 750