Configuration Of Host And Domain Name" Page; Table 79: Wbm "Configuration Of Host And Domain Name" Page - "Hostname" Group; Table 80: Wbm "Configuration Of Host And Domain Name" Page - "Domain - WAGO I/O System 750 Manual

180 Appendix

15.2.1.2.4 Configuration of Host and Domain Name" Page

The settings for the hostname and domain are displayed on the "Configuration of
Host/Domain Name" page.
"Hostname" Group
Table 79: WBM "Configuration of Host and Domain Name" Page – "Hostname" Group
Parameter
Currently used
Configured
Click the [Submit] button to apply a change.
Click the [Clear] button to reset the input field.
The change takes effect immediately.
If the controller has been assigned a host name via DHCP, it is given preference
and the manually configured host name is not used.
To accept the manually configured host name, the configuration of the DHCP
server may have to be reduced by assigning the host name.
"Domain Name" Group
Table 80: WBM "Configuration of Host and Domain Name" Page – "Domain Name" Group
Parameter
Currently used
Configured
Click the [Submit] button to apply a change.
Click the [Clear] button to reset the input field.
The change takes effect immediately.
If the controller has been assigned a domain name via DHCP, it is given
preference and the manually configured domain name is not used.
To accept the manually configured domain name, the configuration of the DHCP
server may have to be reduced by assigning the domain name.
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
750-8210/040-000 PFC200; G2; 4ETH; XTR
Explanation
If you have selected dynamic assignment of an IP
address via DHCP, the name of the host currently
being used is displayed.
Enter the product hostname here; it is then used if
the network interface is changed to a static IP
address or if no hostname is assigned per DHCP
response.
Explanation
If you have selected dynamic assignment of an IP
address via DHCP, the name of the domain
currently being used is displayed.
Enter the product domain name here; it is then used
if the network interface is changed to a static IP
address or if no domain name is assigned per
DHCP response.
WAGO I/O System 750