Determining The Ip Address Of A Host Pc - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
8.2

Determining the IP Address of a Host PC

So that the host PC (e.g. notebook) can communicate with an I/O-IPC via the
ETHERNET, both must be located in the same subnet.
To determine the IP address of a host PC (with MS Windows operating system)
using the MS-DOS prompt, proceed as follows:
1. Click on "Start" and select "Execute".
2. Enter the command
3. Enter the command
4. The IP address, subnet mask and standard gateway, including the
appropriate parameters, are displayed.
Manual
Version 2.3.0
and press the Enter key. A prompt opens.
cmd
and press the Enter key.
ipconfig
Commissioning 55