Communication Interfaces; Digital Outputs; Network Connections; Ethernet Interfaces - WAGO 765-1103/100-000 Manual

Properties
Supply Voltage In-
put
M12, L-coded, plug,
5-pin (4 + FE)
Note
Upper limit on current consumption from X32 (Power out)
Before connecting one or more products to the power supply on socket X32 (Power out),
read section
maximum permitted current consumption.

4.2.2 Communication Interfaces

4.2.2.1 Digital Outputs

Digital Output
M12, A-coded, socket, 5-
pin

4.2.3 Network Connections

4.2.3.1 ETHERNET Interfaces

ETHERNET
M12, D-coded,
socket, 4-pin
16 Product manual | Version: 2.2.0
16DO FLD PN DC 24V 2.0A
Supply Voltage Pin
Output
1
2
3
4
FE
M12, L-coded,
socket, 5-pin (4 +
FE)
8 Power Supply Examples
Pin
1
2
3
4
5
Pin Signal
1 TX+
2 RX+
3 TX–
4 RX–
Housing Shield
Signal Description
1L+ 24 VDC supply voltage U
and sensor/actuator
2L− Reference potential for 2L
1L− Reference potential for 1L
2L+ 24 VDC auxiliary/control voltage U
FE Functional ground
[} 38]. There you will find information on the
Table 3: Digital output (2-channel)
Signal
-
DQ B
2L–
DQ A
-
Table 4: ETHERNET Interfaces
Description
Positive send data
Positive receive data
Negative send data
Negative receive data
Shield connection; housing is connected to functional
ground
765-1103/100-000
Table 2: Supply Voltage
for system
1L
2L
Description
Not connected
Digital output, Channel B
Reference potential
Digital output, Channel A
Not connected