Enable Snmp Traps; Disable Snmp Traps - D-Link DGS-1210/ME Series Reference Manual

Example usage:
To delete a trusted host with an IPv4 address 10.90.90.91:
DGS-1210-28MP/ME:5# delete trusted_host 10.90.90.91
Command: delete trusted_host 10.90.90.91
Success.
DGS-1210-28MP/ME:5#
To delete a trusted host with an IPv6 address 3000::1:
DGS-1210-28MP/ME:5# delete trusted_host 3000::1
Command: delete trusted_host 3000::1
Success.
DGS-1210-28MP/ME:5#

enable snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP trap support on the Switch:
DGS-1210-28MP/ME:5# enable snmp traps
Command: enable snmp traps
Success.
DGS-1210-28MP/ME:5#

disable snmp traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To prevent SNMP traps from being sent from the Switch:
DGS-1210-28MP/ME:5# disable snmp traps
Command: disable snmp traps
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To enable SNMP trap support.
enable snmp traps
The enable snmp traps command enables SNMP trap support on
the Switch.
None.
Only Administrator or operator-level users can issue this command
To disable SNMP trap support on the Switch.
disable snmp traps
The disable snmp traps command disables SNMP trap support on
the Switch.
None.
Only Administrator or operator-level users can issue this command.
106