Show Poe System - D-Link DGS-1210/ME Series Reference Manual

Description
Parameters
Restrictions
Example usage:
To display the PoE with ports 8:
DGS-1210-28MP/ME:5# show poe ports 8
Command: show poe ports 8
Port: 8
State
Priority
Power Limit
Power(W)
Voltage(V)
Current(mA)
Status
Time Range
Success!
DGS-1210-28MP/ME:5#

show poe system

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the PoE system of Switch:
DGS-1210-28MP/ME:5# show poe system
Command: show poe system
Power Limit
Power Consumption
Power Remained
Power Disconnection Method
Detection Legacy PD
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
The show poe ports displays the Power over Ethernet (PoE) ports of
the Switch.
[all | <portlist>] – Specifies the ports or all ports to be displayed.
None.
: Enable
: Low
: Auto
: 0.0
: 0.0
: 0.0
: POWER OFF
: N/A
Used to display the system information of Power over Ethernet
(PoE).
show poe system
The show poe system displays the Power over Ethernet (PoE)
system information of the Switch.
None.
None.
: 193
: 0
: 0
: Deny Next Port
: Disable
169