Enable Sflow; Disable Sflow; Show Sflow - D-Link DGS-1210/ME Series Reference Manual

enable sflow

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable sFlow golbally:
DGS-1210-28MP/ME:5# enable sflow
Command: enable sflow
Success.
DGS-1210-28MP/ME:5#

disable sflow

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable sFlow golbally:
DGS-1210-28MP/ME:5# disable sflow
Command: disable sflow
Success.
DGS-1210-28MP/ME:5#

show sflow

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to enable the sFlow function on the Switch.
enable sflow
The enable sflow command is used to enable the sFlow function on
the Switch.
None.
Only Administrator, operator and power user-level users can issue
this command.
Used to disable the sFlow function on the Switch.
disable sflow
The disable sflow command is used to disable the sFlow function
on the Switch.
None.
Only Administrator, operator and power user-level users can issue
this command.
Used to show the sFlow information on the Switch.
show sflow
The show sflow command is used to show the sFlow information on
the Switch.
None.
None.
401