Show Command_History - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# ?
Command: ?
?
cable diagnostic port
clear address_binding dhcp_snoop binding_entry ports
clear arptable
clear counters
clear ethernet_oam ports
clear fdb
clear flood_fdb
clear igmp_snooping data_driven_group
clear log
clear mld_snooping data_driven_group
clear tech support
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode ports
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x fwd_pdu system
config 802.1x guest_vlan ports
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a ALL

show command_history

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the command history:
DGS-1210-28MP/ME:5# show command_history
Command: show command_history
?
show log
show log_save_timing
show log_save_timing
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
To display the command history.
show command_history
The show command_history command displays the command
history.
None.
None.
422