The SSH commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in
the following table.
Command
enable ssh
disable ssh
config ssh algorithm
config ssh authmode
show ssh authmode
config ssh server
show ssh server
show ssh algorithm
config ssh user
show ssh user
authmode
Each command is listed in detail, as follows:
enable ssh
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SSH:
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
[3DGS | MD5 | RSA | SHA1] [disable | enable]
[publickey | hostbased | password] [enable | disable]
[authfail <int 2-20> | contimeout <sec 120-600> | maxsession <int 1-4> | rekey
[10min | 30min | 60min | never]]
<string 15> authmode [hostbased hostname <domain_name 32> hostname_IP
<ip_addr> | password | publickey]
To enable SSH.
enable ssh
The enable ssh command enables SSH on the Switch.
None.
Only administrator or operator-level users can issue this command.
SSH COMMANDS
426
58