Upload - D-Link DGS-1210/ME Series Reference Manual

Parameters
Restrictions
Example usage:
To download a firmware file:
DGS-1210-28MP/ME:5# download firmware_fromTFTP 172.21.45.73 DGS-1210-
28MPME-B1-7-01-B038-ALL.hex image_id 1
Command: download firmware_fromTFTP 172.21.45.73 DGS-1210-28MPME-B1-7-
01-B038-ALL.hex image_id 1
Connecting to server.......................Done.
Download firmware.........................Done. Do not power off!
Please wait, programming flash......Done.
Success.
Image Updated Successful
DGS-1210-28MP/ME:5#

upload

Purpose
Syntax
Description
Parameters
Restrictions
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
cfg_fromFTP <ftp_url 256> − Downloads a switch configuration file
from a FTP server.
config_id <value 1-2> − Indicates the Configuration file to be
downloaded.
firmware_fromFTP <ftp_url 256> − Downloads and installs firmware
on the Switch from a FTP server.
image_id <value 1-2> − Indicates the image file is to be
downloaded.
Only Administrator or operator-level users can issue this command.
To upload the current switch settings to a TFTP server.
upload [[firmware_toTFTP [<ipaddr> | <ipv6_addr>]
<path_filename 64>] | [cfg_toTFTP [<ipaddr> | <ipv6_addr>]
<path_filename 64> image_id <value 1-2>] | [log_toTFTP
[<ipaddr> | <ipv6_addr>] <path_filename 64>]]
upload [[firmware_toFTP <ftp_url 256>] <path_filename 64>
image_id <value 1-2> | cfg_toFTP <ftp_url (256)>
<path_filename (64)> [config_id <value (1-2)>]]
The upload command uploads the Switch's current settings to a
TFTP server.
firmware_toTFTP − Specifies that the Switch's current firmware are
to be uploaded to the TFTP server.
<ipaddr> − The IPv4 address of the TFTP server. The TFTP server
must be on the same IP subnet as the Switch.
<ipv6_addr> − The IPv6 address of the TFTP server. The TFTP
server must be on the same IP subnet as the Switch.
<path_filename 64> − The location of the Switch configuration file on
the TFTP server.
image_id <value 1-2> − Specifies the image id which to be
uploaded.
Only Administrator or operator-level users can issue this command.
123