Config Mac_Based_Access_Control Method; Config Mac_Based_Access_Control Port - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To configure MAC-based AC password:
DGS-1210-28MP/ME:5# config mac_based_access_control password 1234
Command: config mac_based_access_control password 1234
Success.
DGS-1210-28MP/ME:5#

config mac_based_access_control method

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure mac based access control authenticating method:
DGS-1210-28MP/ME:5# config mac_based_access_control method radius
Command: config mac_based_access_control method radius
Success.
DGS-1210-28MP/ME:5#

config mac_based_access_control port

Purpose
Syntax
Description
Parameters
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
is 16.
Only administrator or operator-level users can issue this command.
To configure the MAC-based AC authenticating method.
config mac_based_access_control method [local | radius]
The config mac_based_access_control method command is
used to specify to authenticate via local database or via RADIUS
server.
local – Specifies to authenticate via local database.
radius – Specifies to authenticate via RADIUS server
Only administrator or operator-level users can issue this command.
To configure the parameter of the MAC-based access control.
config mac_based_access_control port [<portlist> | all] {state
[enable | disable] | aging_time [infinite | <value 1-1440>] |
block_time <value 0-300>}
The config mac_based_access_control port command is used to
configure the parameter of the MAC-based access control.
[<portlist> | all] – Specifies a range of ports or all ports to be
configured.
state [enable | disable] –Specifies whether MAC-based AC function
is enabled or disabled.
aging_time [infinite | <value 1-1440>] – A time period during which
an authenticated host will be kept in authenticated state. When the
aging time is time–out, the host will be moved back to
280