Delete Snmp V6Host; Show Snmp V6Host - D-Link DGS-1210/ME Series Reference Manual

Restrictions
Example usage:
To create an SNMP host to receive SNMP messages:
DGS-1210-28MP/ME:5# create snmp v6host 3000::1 v3 noauth_nopriv dlink
Command: create snmp v6host 3000::1 v3 noauth_nopriv dlink
Success.
DGS-1210-28MP/ME:5#

delete snmp v6host

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To delete an SNMP host entry:
DGS-1210-28MP/ME:5# delete snmp v6host 90.90.22
Command: delete snmp host 10.90.90.22
Success.
DGS-1210-28MP/ME:5#

show snmp v6host

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
identifies user name of an SNMP community. This string is used like
a password to give remote SNMP managers access to MIB objects
in the Switch's SNMP agent.
noauth_nopriv − Specifies that there is no authorization and no
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_nopriv − Specifies that authorization is required, but there is no
encryption of packets sent between the Switch and a remote SNMP
manager.
auth_priv − Specifies that authorization is required, and that packets
sent between the Switch and a remote SNMP manger are
encrypted.
Only Administrator-level users can issue this command.
To remove a recipient of SNMP traps generated by the Switch's
SNMP agent.
delete snmp v6host <ip6_addr>
The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipv6_addr> − The IPv6 address of a remote SNMP manager that
receives SNMP traps generated by the Switch's SNMP agent.
Only Administrator-level users can issue this command.
To display the recipient of SNMP traps generated by the Switch's
SNMP agent.
show snmp v6host {<ip6_addr>}
102