show address_binding auto_scan list
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the auto scan list of address binding on the Switch:
DGS-1210-28MP/ME:5# show address_binding auto_scan list
Command: show address_binding auto_scan list
VLAN IP Address
--------- ----------------------------------- ----------------------
Total Entries : 0
DGS-1210-28MP/ME:5#
enable address_binding dhcp_snoop
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the DHCP snooping of address binding for port 3~5 on the Switch:
DGS-1210-28MP/ME:5# enable address_binding dhcp_snoop ports 3-5
Command: enable address_binding dhcp_snoop ports 3-5
Success.
DGS-1210-28MP/ME:5#
disable address_binding dhcp_snoop
Purpose
Syntax
Description
Parameters
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to display IP-MAC-port binding entries.
show address_binding auto_scan list
This show address_binding auto_scan list command is used to
display auto scan list of address binding on the Switch.
None.
None.
MAC Address
Used to enable address binding DHCP Snooping.
enable address_binding dhcp_snoop ports [<portlist> | all]
This enable address_binding dhcp_snoop command is used to
enable IP-MAC-port binding DHCP snooping entries.
[<portlist> | all] – Specifies a port, a range of ports or all ports to be
enabled of the address binding DHCP snooping on the Switch.
Only administrator or operate-level users can issue this command.
Used to disable address binding DHCP Snooping.
disable address_binding dhcp_snoop ports [<portlist> | all]
This disable address_binding dhcp_snoop command is used to
disable IP-MAC-port binding DHCP snooping entries.
[<portlist> | all] – Specifies a port, a range of ports or all ports to be
enabled of the address binding DHCP snooping on the Switch.
Port Bound
------ -----------
79