Enable Community_Encryption; Disable Community_Encryption - D-Link DGS-1210/ME Series Reference Manual

Syntax
Description
Parameters
Restrictions
Example usage:
To display the current name of the SNMP engine on the Switch:
DGS-1210-28MP/ME:5# show snmp engineID
Command: show snmp engineID
Default SNMP Engine ID : *??445532d313231
SNMP Engine ID
DGS-1210-28MP/ME:5#

enable community_encryption

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the encryption state on SNMP community string:
DGS-1210-28MP/ME:5# enable community_encryption
Command: enable community_encryption
Success.
DGS-1210-28MP/ME:5#

disable community_encryption

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
show snmp engineID
The show snmp engineID command displays the identification of
the SNMP engine on the Switch.
None.
None.
: 4445532d313231302d323600aebfcb2d8d
To enable the encryption state on SNMP community string.
enable community_encryption
The enable community_encryption command is used to enable
the encryption state on SNMP community string.
None.
Only administrator, operate or power user-level users can issue this
command.
To disable the encryption state on SNMP community string.
disable community_encryption
The disable community_encryption command is used to disable
the encryption state on SNMP community string.
None.
Only administrator, operate or power user-level users can issue this
command.
95