DGS-1210-28MP/ME:5#
disable snmp rstpport_state_change traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SNMP RSTP port state change traps support on the Switch:
DGS-1210-28MP/ME:5# disable snmp rstpport_state_change traps
Command: disable snmp rstpport_state_change traps
Success.
DGS-1210-28MP/ME:5#
enable snmp duplicate_IP_detected traps
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable the SNMP duplicate_IP_detected traps on the Switch:
DGS-1210-28MP/ME:5# enable snmp duplicate_IP_detected traps
Command: enable snmp duplicate_IP_detected traps
Success.
DGS-1210-28MP/ME:5#
disable snmp duplicate_IP_detected traps
Purpose
Syntax
Description
Parameters
Restrictions
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To disable SNMP RSTP port state change traps.
disable snmp rstpport_state_change traps
The disable snmp rstpport_state_change traps command
disables SNMP RSTP port state change traps on the Switch.
None.
Only Administrator or operator-level users can issue this command.
To enable SNMP duplicate IP detected traps support on the Switch.
enable snmp duplicate_IP_detected traps
The enable snmp duplicate_IP_detected traps command enables
SNMP duplicate IP detected traps support on the Switch.
None.
Only Administrator or operator-level users can issue this command.
To disable SNMP duplicate IP detected traps support on the Switch.
disable snmp duplicate_IP_detected traps
The disable snmp
disables SNMP duplicate IP detected traps support on the Switch.
None.
Only Administrator or operator-level users can issue this command.
duplicate_IP_detected
119
traps command