Enable Telnet; Disable Telnet; Telnet - D-Link DGS-1210/ME Series Reference Manual

enable telnet

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable telnet:
DGS-1210-28MP/ME:5# enable telnet
Command: enable telnet
Success.
DGS-1210-28MP/ME:5#

disable telnet

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable telnet:
DGS-1210-28MP/ME:5# disable telnet
Command: disable telnet
Success.
DGS-1210-28MP/ME:5#

telnet

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To telnet another device which IP is 10.90.90.91:
DGS-1210-28MP/ME:5# telnet 10.90.90.91
Command: telnet 10.90.90.91
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To enable the telnet.
enable telnet
The enable telnet command enables telnet.
None.
Only Administrator or operate-level users can issue this command.
To disable telnet.
disable telnet
The disable telnet command disables telnet.
None.
Only Administrator or operate-level users can issue this command.
To telnet another device.
telnet <ipaddr> {-l <string>}
The telnet command is used to telnet another device.
None.
Only Administrator or operate-level users can issue this command.
31