Create Snmp Host - D-Link DGS-1210/ME Series Reference Manual

DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
DGS-1210-28MP/ME:5# show snmp groups
Command: show snmp groups
SNMP Group Table
Group Name Read View Write View Notify View Security Model Security Level
------------------ -------------- ---------------- --------------- ---------------------- -----------------
sg1 df
ReadOnly ReadWrite
ReadOnly ReadWrite
ReadWrite ReadWrite
ReadWrite ReadWrite
Total Entries: 5
DGS-1210-28MP/ME:5#

create snmp host

Purpose
Syntax
Description
Parameters
df d
--- ReadWrite
--- ReadWrite
ReadWrite ReadWrite
ReadWrite ReadWrite
To create a recipient of SNMP traps generated by the Switch's
SNMP agent.
create snmp host <ipaddr> [v1 <username 32> | v2c <username
32> | v3 [noauth_nopriv | auth_nopriv | auth_priv] <username
32>]
The create snmp host command creates a recipient of SNMP traps
generated by the Switch's SNMP agent.
<ipaddr> − The IP address of the remote management station to
serve as the SNMP host for the Switch.
v1 – Specifies that SNMP version 1 is to be used. The Simple
Network Management Protocol (SNMP), version 1, is a network
management protocol that provides a means to monitor and control
network devices.
v2c – Specifies that SNMP version 2c is to be used. The SNMP v2c
supports both centralized and distributed network management
strategies. It incluDGS
Management Information (SMI) and adds some security features.
v3 – Specifies that the SNMP version 3 is to be used. SNMP v3
provides secure access to devices through a combination of
authentication and encrypting packets over the network. SNMP v3
adds:
• Message integrity − ensures that packets have not been
tampered with during transit.
• Authentication − determines if an SNMP message is from a
valid source.
• Encryption − scrambles the contents of messages to prevent
it being viewed by an unauthorized source.
<username 32> − A string of up to 32 alphanumeric characters that
identifies user name of an SNMP community. This string is used like
a password to give remote SNMP managers access to MIB objects
in the Switch's SNMP agent.
noauth_nopriv − Specifies that there is no authorization and no
99
v3
v1
v2c
v1
v2c
improvements in the
AuthPriv
NoAuthNoPriv
NoAuthNoPriv
NoAuthNoPriv
NoAuthNoPriv
Structure of