Create Rmon Collection Stats - D-Link DGS-1210/ME Series Reference Manual

Description
Parameters
Restrictions
Example usage:
To display the RMON alarm feature on the Switch:
DGS-1210-28MP/ME:5# show rmon alarms events history overview
Command: show rmon alarms events history overview
RMON is enabled
Alarm table is empty
Event table is empty
History Ether table is empty
Success.
DGS-1210-28MP/ME:5#

create rmon collection stats

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create a RMON collection stats on the Switch:
DGS-1210-28MP/ME:5# create rmon collection stats 100 port 2 owner dlink
Command: create rmon collection stats 100 port 2 owner dlink
Success.
DGS-1210-28MP/ME:5#
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
The show rmon alarm command displays remote monitoring
(RMON) alarm status for the SNMP function on the Switch.
event − Specifies the event of RMON alarm to be displayed.
history {<hist_index 1-65535> | overview} – Specifies the history of
RMON alarm to be displayed. Specifies the history index or overview
of RMON alarm.
None.
To allow user to configure the rmon stats settings on the Switch.
create rmon collection stats <stats_index 1-65535> port
<ifindex> owner <owner_string 32>
The create rmon collection stats command allows user to
configure the rmon stats settings on the Switch.
<stats_index 1-65535> − Specifies the stats number.
port <ifindex> − Specifies the port from which the RMON information
was taken.
owner <owner_string 32> − Specifies the device or user that defined
the stats.
Only Administrator or operator-level users can issue this command.
226