Config Mld_Snooping Mrouter_Ports; Config Mld_Snooping Mrouter_Ports_Forbidden - D-Link DGS-1210/ME Series Reference Manual

Parameters
Restrictions
Example usage:
To display mld snooping multicast VLAN group:
DGS-1210-28MP/ME:5# show mld_snooping multicast_vlan_group
Command: show mld_snooping multicast_vlan_group
VID Vlan Name
---- -------------------------------- -----------------------------------------
DGS-1210-28MP/ME:5#

config mld_snooping mrouter_ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure mld mrouter ports:
DGS-1210-28MP/ME:5# config mld_snooping mrouter_ports vlanid 1 add 1-3
Command: config mld_snooping mrouter_ports vlanid 1 add 1-3
Success.
DGS-1210-28MP/ME:5#

config mld_snooping mrouter_ports_forbidden

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
<vlan_name 32> − Specifies the name of multicast VLAN to be
displayed.
None.
IP Range
To enable mld mrouter ports.
config mld_snooping mrouter_ports [vlan_name <string 32> |
vlanid <vidlist> | all] [add | delete] <portlist>
The config mld_snooping mrouter_ports command defines a port
that is connected to a multicast router port.
vlan_name <string 32> – specifies that the mld snooping applies
only to this previously created VLAN.
vlanid <vidlist> – specifies that the mld snooping applies only to this
previously created VLAN id.
all – specifies that MLD snooping is to be configured for all VLANs
on the Switch.
add – Adds a specified port to the mld snooping mrouter port.
delete – Deletes a specified port to the mld snooping mrouter port.
<portlist> – Defines the ports to be included from the mld snooping
mrouter group.
Only administrator, operator or power user–level users can issue
this command. Separate non–consecutive Ethernet ports with a
comma and no spaces; use a hyphen to DGSignate a range of
ports. These ports are defined as connected to a multicast router.
To define mld mrouter ports forbidden on the Switch.
config mld_snooping mrouter_ports_forbidden [vlan_name
352