Config Erps Instance Rpl; Config Erps Instance Protected_Vlan - D-Link DGS-1210/ME Series Reference Manual

config erps instance rpl

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the instance 1 so that the west port will act as the RPL port and configure the switch as an
RPL owner node:
DGS-1210-28MP/ME:5# config erps instance 1 rpl_role owner
Command: config erps instance 1 rpl_role owner
Success.
DGS-1210-28MP/ME:5# config erps instance 1 rpl_port west
Command: config erps instance 1 rpl_ port west
Success.
DGS-1210-28MP/ME:5#

config erps instance protected_vlan

Purpose
Syntax
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Used to configure the RPL port or the RPL role for a specific erps
instance.
config erps instance <value 1-16> [rpl_port [west | east | none] |
rpl_role [owner | neighour | none]]
The config erps instance rpl commanmd is used to configure the
RPL port, the RPL owner and neighour.

RPL port – Specifies one of the instance ring ports as the RPL
port. To remove an RPL port from an instance, use the none
designation for rpl_port.

RPL role – Specifies the node's role. Note that the RPL port,
RPL role cannot be modified when ERPS instance is enabled;
and the virtual channel cannot be configured as RPL port. For
example, if a ring port is configured on the virtual channel and
the instance ring port is configured as an RPL port, an error
message will be displayed and the configuration will fail.
<value 1-16> – Specifies the instance ID to be configured.
rpl_port [west | east | none] – Specifies the west-ring port or east-
ring port as the RPL port. Select none to specify that no RPL port on
this node. By default, the node has no RPL port.
rpl_role [owner | neighbour | none] – Specifies the device as an RPL
owner node or neighbor node. Select none to specify that no RPL
role on this node. By default, the RPL rpl_role is none.
Only Administrator, operator and power user-level users can issue
this command.
Used to configure the protected VLAN for a specific instance.
config erps instance <value 1-16> protected_vlan [add | delete]
vlanid <vidlist>
252