Config Router_Ports_Forbidden - D-Link DGS-1210/ME Series Reference Manual

Parameters
Restrictions
Example usage:
To add the static router ports 1-5:
DGS-1210-28MP/ME:5# config router_ports vlanid 1 add 1-5
Command: config router_ports vlanid 1 add 1-5
Success.
DGS-1210-28MP/ME:5#

config router_ports_forbidden

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To deny router ports:
DGS-1210-28MP/ME:5# config router_ports_forbidden vlanid 2 add 10-12
Command: config router_ports_forbidden vlanid 2 add 10-12
Success.
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
packets with such a router as its destination will reach the multicast-
enabled router − regardless of protocol, etc.
vlan_name <string 32> − The name of the VLAN on which the router
port resides. Up to 32 characters can be used.
vlanid <vidlist> − The VLAN id of the VLAN on which the router port
resides.
all − Specifies all ports on the Switch to be configured.
[add | delete] – Specifies whether to add or delete ports defined in
the following parameter <portlist>, to the router port function.
<portlist> − A port or range of ports that will be configured as router
ports.
Only administrator, operator or power user-level users can issue this
command.
To deny ports becoming router ports.
config router_ports_forbidden [vlan_name <string 32> | vlanid
<vidlist> | all] [add | delete] <portlist>
The config router_port_forbidden command denies a range of
ports access to multicast–enabled routers. This ensures all packets
with such a router as its destination will not reach the multicast–
enabled router − regardless of protocol, etc.
vlan_name <string 32> − The name of the VLAN on which the router
port resides. Up to 32 characters can be used.
vlanid <vidlist> − The VLAN id of the VLAN on which the router port
resides.
all − Specifies all ports on the Switch to be configured.
[add | delete] – Specifies whether to deny ports defined in the
following parameter <portlist>, to the router port function.
<portlist> − A port or range of ports that will be denied access as
router ports.
Only administrator or operator-level users can issue this command.
327