Disable Snmp Icmpv6_Ra_All_Node Traps; Enable Snmp Impb_Violation Traps; Disable Snmp Impb_Violation Traps - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# enable snmp ICMPv6_RA_all_node traps
Command: enable snmp ICMPv6_RA_all_node traps
Success.
DGS-1210-28MP/ME:5#

disable snmp icmpv6_RA_all_node traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SNMP ICMPv6 RA all-nodes traps:
DGS-1210-28MP/ME:5# disable snmp ICMPv6_RA_all_node traps
Command: disable snmp ICMPv6_RA_all_node traps
Success.
DGS-1210-28MP/ME:5#

enable snmp IMPB_violation traps

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable SNMP IMPB violation traps support on the Switch:
DGS-1210-28MP/ME:5# enable snmp IMPB_violation traps
Command: enable snmp IMPB_violation traps
Success.
DGS-1210-28MP/ME:5#

disable snmp IMPB_violation traps

Purpose
Syntax
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
Used to disable SNMP ICMPv6 RA all-node traps state.
disable snmp ICMPv6_RA_all_node traps
The disable snmp ICMPv6_RA_all_node traps command is used
to disable SNMP ICMPv6 RA all-node traps state.
None.
Only administrator or operate-level users can issue this command.
To enable SNMP IMPB violation traps.
enable snmp IMPB_violation traps
The enable snmp IMPBv2 traps command enables SNMP IMPB
violation traps support on the Switch.
None.
Only Administrator or operator-level users can issue this command.
To disable SNMP IMPB violation traps.
disable snmp IMPB_violation traps
115