Show Config - D-Link DGS-1210/ME Series Reference Manual

Size
Updated Time : 01/01/2015 00:06:56
From
User
IMAGE TWO:
Version
Size
Updated Time : 01/01/2015 00:06:56
From
User
DGS-1210-28MP/ME:5#

show config

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
DGS-1210-28MP/ME:5# show config config_in_nvram config_id 1
Command: show config config_in_nvram config_id 1
#---------------------------------------------------------------------------------------------------------
#
#
#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
: 14117904Bytes
: 10.90.90.98
: Anonymous (web)
: 7.01.B030
: 14117904Bytes
: 10.90.90.98
: Anonymous (unknown)
Used to display the current or saved version of the configuration
settings of the Switch.
show config [current_config | modified | config_in_nvram
config_id <value 1-2> {[begin | include | exclude] <string 80>
{<string 80>} {<string 80>}}
The show config command is used to display all the configuration
settings that are saved to NV RAM or display the configuration
settings as they are currently configured. Use the keyboard to list
settings one line at a time (Enter), one page at a time (Space) or
view all (a).
current_config – To specify the current configuration to be displayed.
modified – Specifies to display only the commands which are not
from the 'reset' default setting.
config_in_nvram – Specifies to display the configuration from naram.
config_id <value 1-2> – Specifies to display the configuration from
nvram.
begin – The first line that contains the specified filter string will be
the first line of the output.
include – Includes lines that contain the specified filter string.
exclude – Excludes lines that contain the specified filter string.
<string 80> - To specify a filter string enclosed by the quotation mark
symbol.
Only Administrator -level users can issue this command.
DGS-1210-28MP/ME Gigabit Ethernet Switch Configuration
Firmware: Build 7.01.B037
125