Disable Ssh; Config Ssh Algorithm - D-Link DGS-1210/ME Series Reference Manual

DGS-1210-28MP/ME:5# enable ssh
Command: enable ssh
Success.
The SSH server is enabled.
DGS-1210-28MP/ME:5#

disable ssh

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable SSH:
DGS-1210-28MP/ME:5# disable ssh
Command: disable ssh
Success.
The SSH server is disable.
DGS-1210-28MP/ME:5#

config ssh algorithm

Purpose
Syntax
Description
Parameters
Restrictions
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To disable SSH.
disable ssh
The disable ssh command disables SSH on the Switch.
None.
Only administrator or operator-level users can issue this command.
To configure the SSH algorithm.
config ssh algorithm [3DES | MD5 | RSA | SHA1] [disable |
enable]
The config ssh algorithm command configures the SSH algorithm
setting on the Switch.
Select the algorithm to be disabled or enabled:

3DES – Triple Data Encryption Standard encryption
algorithm with Cipher Block Chaining.

MD5 – Hash for Message Authentication Code (HMAC)
MD5 Message Digest (MD5) mechanism.

RSA – Hash for Message Authentication Code (HMAC)
mechanism utilizing the RSA encryption algorithm.

SHA1 – Hash for Message Authentication Code (HMAC)
Secure Hash Algorithm (SHA) mechanism.
[disable | eanble] – Enables or Disables the SSH algorithm on the
Switch.
Only administrator or operator-level users can issue this command.
427