Show Mld_Snooping Statistics Counter; Clear Mld_Snooping Statistics Counter - D-Link DGS-1210/ME Series Reference Manual

Total Entries : 0
DGS-1210-28MP/ME:5#

show mld_snooping statistics counter

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the MLD_snooping statistics counter for port 1 to 3:
DGS-1210-28MP/ME:5# show mld_snooping statistic counter ports 1-3
Command: show mld_snooping statistic counter ports 1-3
Total Entries : 0
DGS-1210-28MP/ME:5#

clear mld_snooping statistics counter

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear the MLD_snooping statistics counters:
DGS-1210-28MP/ME:5# clear mld_snooping statistics counter
Command: clear mld_snooping statistics counter
Success.
DGS-1210-28MP/ME:5#
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
To display display the statistics counter for MLD protocol packets
that are received by the Switch since MLD snooping was enabled.
show mld_snooping statistics counter [vlan_name <string 32> |
vlanid <vlanid_list> | ports <portlist>]
The show mld_snooping statistics counter command displays
the statistics counter for MLD protocol packets that are received by
the Switch since MLD snooping was enabled.
vlan_name <string 32> – Specifies on which VLAN name to be
displayed.
vlanid <vidlist> – Specifies on which VLAN ID to be displayed.
ports <portlist> – Specifies the ports of MLD snooping ports to be
displayed.
None.
To clear MLD snooping statistics counters.
clear mld_snooping statistics counter
The clear mld_snooping statistics counter command clears MLD
snooping statistics counters.
None.
Only administrator–level users can issue this command.
359