Config 802.1X Auth_Parameter Ports - D-Link DGS-1210/ME Series Reference Manual

Parameters
Restrictions
Example usage:
To display the 802.1x configurations of port 2:
DGS-1210-28MP/ME:5# show 802.1x auth_configuration ports 2
Command: show 802.1x auth_configuration ports 2
Authentication Mode
Port number
Capability
AdminCrlDir
OpenCrlDir
Port Control
QuietPeriod
TxPeriod
SuppTimeout
ServerTimeout : 30
MaxReq
ReAuthPeriod : 3600 sec
ReAuthenticate : Disable
DGS-1210-28MP/ME:5#

config 802.1x auth_parameter ports

Purpose
Syntax
Description
Parameters
DGS-1210/ME Metro Ethernet Switch CLI Reference Guide
reauthentications.
ReAuthenticate: true/false − Shows whether or not to reauthenticate.
ports <portlist> − Specifies a port or range of ports to be viewed.
None.
: Port_base
: 2
: none
: Both
: Both
: ForceAuthorized
: 60 sec
: 30 sec
: 30 sec
sec
: 2 times
To configure the 802.1x authentication parameters on a range of
ports. The default parameter returns all ports in the specified range
to their default 802.1x settings.
config 802.1x auth_parameter ports [<portlist> | all] [default |
{ port_control [force_unauth | auto | force_auth] | quiet_period
<sec 0-65535> | tx_period <sec 1-65535> | supp_timeout <sec 1-
65535> | server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | enable_reauth [enable | disable] |
direction [both | in]}]
The config 802.1x auth_parameter ports command configures the
802.1x authentication parameters on a range of ports. The default
parameter returns all ports in the specified range to their default
802.1x settings.
[<portlist> | all] – A port, range of ports or all ports to be configured.
all – Specifies all of the ports on the Switch.
default – Returns all of the ports in the specified range to their
802.1x default settings.
port_control – Configures the administrative control over the
authentication process for the range of ports. The options are:
•
force_auth – Forces the Authenticator for the port to
become authorized. Network access is allowed.
371