Create Authen_Login Method_List_Name - D-Link DGS-1210/ME Series Reference Manual

Command
delete authen server_group
show authen server_group
enable admin
config admin local_enable
config accounting
config accounting service
config accounting service
command
create accounting
method_list_name
delete accounting
method_list_name
show accounting
enable
aaa_server_password_encryption
disable
aaa_server_password_encryption
show aaa
Each command is listed in detail, as follows:

create authen_login method_list_name

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create the method list 'Trinity'.
DGS-1210 Metro Ethernet Managed Switch CLI Reference Guide
Parameter
ipv6address <ipv6addr>] protocol [radius | tacacs+]
<string 15>
{<string 15>}
[default | method_list_name <string 15>] method {tacacs+ | radius |
server_group <string 15> | none}
[network | shell | system] state [enable {[radius_only |
method_list_name <string 15> | default_method_list]} | disable]
{administrator | operator | power_user | user} [method_list_name
<string> | none]
<string 15>
<string 15>
[all | default | method_list_name <string 15>]
To create a user-defined list of authentication methods for users
logging on to the Switch.
create authen_login method_list_name <string 15>
The create authen_login method_list_name command creates a
list of authentication techniques for user login. The Switch can
support up to eight method lists, but one is reserved as a default and
cannot be deleted. Multiple method lists must be created and
configured separately.
<string 15> - Defines the method_list_name to be created as a string
of up to 15 alphanumeric characters.
Only Administrator-level users can issue this command.
436